JAMB Syllabus for Mathematics 2025/2026 PDF Download

You can download the complete JAMB syllabus for Mathematics 2025/2026 in PDF or read it here on this web page. The JAMB Mathematics Syllabus is where the JAMB Mathematics questions for the 2025 JAMB exam will be set.

Kindly make time to study all the topics on this syllabus.

JAMB Syllabus for Mathematics 2025/2026

This JAMB Mathematics Syllabus provides guides to all candidates who register to sit for the Unified Tertiary Matriculation Examination (UTME) on the English Language content to be tested in the examination.

The examination is designed to test candidates’ knowledge of every aspect of the syllabus developed for Mathematics. Therefore, candidates for the UTME are expected to have adequate knowledge of the entire syllabus of the English Language subject.

Particular attention must be paid to recommended books and literature for some subjects, as questions based on such references will be set in the 2025 JAMB UTME.

A compulsory recommended book is usually sold to every candidate at registration to encourage the culture of reading. The book’s content is tested as part of the questions in Mathematics, which is compulsory for every candidate. Therefore, every candidate is advised to ensure that he/she is given a copy of the book at the point of registration.

GENERAL OBJECTIVES

The Unified Tertiary Matriculation Examination (UTME) syllabus in Mathematics aims to prepare the candidates for the Board’s examination. It is designed to test the achievement of the course objectives, which are to:

acquire computational and manipulative skills;
develop precise, logical, and formal reasoning skills;
develop deductive skills in the interpretation of graphs, diagrams, and data;
apply mathematical concepts to resolve issues in daily living.

This syllabus is divided into five sections:

Number and Numeration
Algebra
Geometry/Trigonometry
Calculus
Statistics

Detailed JAMB 2025 Mathematics Syllabus

SECTION I: NUMBER AND NUMERATION

(1) Number bases:
- (a) operations in different number bases from 2 to 10;
- (b) conversion from one base to another including fractional parts.

Candidates should be able to:

i. perform four basic operations (x, +, -, ÷);
ii. convert one base to another;
iii. perform operations in modulo arithmetic.
(2) Fractions, Decimals, Approximations, and Percentages:
- (a) fractions and decimals;
- (b) significant figures;
- (c) decimal places;
- (d) percentage errors;
- (e) simple interest;
- (f) profit and loss percent;
- (i) ratio, proportion, and rate;
- (j) shares and valued added tax (VAT).

Candidates should be able to:

i. perform basic operations (x, +, -, ÷) on fractions and decimals;
ii. express to specified number of significant figures and decimal places;
iii. calculate simple interest, profit, and loss percent; ratio proportion, rate, and percentage error;
iv. solve problems involving share and VAT.
(3) Indices, Logarithms, and Surds:
- (a) laws of indices;
- (b) equations involving indices;
- (c) standard form;
- (d) laws of logarithm;
- (e) logarithm of any positive number to a given base;
- (f) change of bases in logarithm and application;
- (g) relationship between indices and logarithm;
- (h) Surds.

Candidates should be able to:

i. apply the laws of indices in calculation;
ii. establish the relationship between indices and logarithms in solving problems;
iii. solve equations involving indices;
iv. solve problems in different bases in logarithms;
v. simplify and rationalize surds;
vi. perform basic operations on surds.
(4) Sets:
- (a) types of sets
- (b) algebra of sets
- (c) Venn diagrams and their applications

Candidates should be able to:

i. identify types of sets, i.e. empty, universal, complements, subsets, finite, infinite, and disjoint sets;
ii. solve problems involving cardinality of sets;
iv. iii. solve set problems using symbols;
v. iv. use Venn diagrams to solve problems involving not more than 3 sets.

SECTION II: ALGEBRA

(1) Polynomials:
- (a) change of subject of formula;
- (b) multiplication and division of polynomials;
- (c) factorization of polynomials of degree not exceeding 3;
- (d) roots of polynomials not exceeding degree 3;
- (e) factor and remainder theorems;
- (f) simultaneous equations including one linear one quadratic;
- (g) graphs of polynomials of degree not greater than 3.

Candidates should be able to:

i. find the subject of the formula of a given equation;
ii. apply factor and remainder theorem to factorize a given expression;
iii. multiply, divide polynomials of degree not more than 3 and determine values of defined and undefined expression;
iv. factorize by regrouping difference of two squares, perfect squares, and cubic expressions; etc.
v. solve simultaneous equations – one linear, one quadratic;
vi. interpret graphs of polynomials including applications to maximum and minimum values.
(2) Variation:
- (a) direct;
- (b) inverse;
- (c) joint;
- (d) partial;
- (e) percentage increase and decrease.

Candidates should be able to:

i. solve problems involving direct, inverse, joint, and partial variations;
ii. solve problems on percentage increase and decrease in variation.
(3) Inequalities:
- (a) analytical and graphical solutions of linear inequalities;
- (b) quadratic inequalities with integral roots only.

Candidates should be able to:

i. solve problems on linear and quadratic inequalities;
ii. interpret graphs of inequalities.
(4) Progression:
- (a) nth term of a progression
- (b) sum of A. P. and G. P.

Candidates should be able to:

i. determine the nth term of a progression;
ii. compute the sum of A. P. and G.P;
iii. sum to infinity of a given G.P.
(5) Binary Operations:
- (a) properties of closure, commutativity, associativity, and distributivity;
- (b) identity and inverse elements (simple cases only).

Candidates should be able to:

i. solve problems involving closure, commutativity, associativity, and distributivity;
ii. solve problems involving identity and inverse elements.
(6) Matrices and Determinants:
- (a) algebra of matrices not exceeding 3 x 3;
- (b) determinants of matrices not exceeding 3 x 3;
- (c) inverses of 2 x 2 matrices; [excluding quadratic and higher degree equations].

Candidates should be able to:

i. perform basic operations (x, +, -, ÷) on matrices;
ii. calculate determinants;
iii. compute inverses of 2 x 2 matrices.

SECTION III: GEOMETRY AND TRIGONOMETRY

(1) Euclidean Geometry:
- (a) Properties of angles and lines
- (b) Polygons: triangles, quadrilaterals, and general polygons;
- (c) Circles: angle properties, cyclic quadrilaterals, and intersecting chords;
- (d) construction.

Candidates should be able to:

i. identify various types of lines and angles;
ii. solve problems involving polygons;
iii. calculate angles using circle theorems;
iv. identify construction procedures of special angles, e.g. 30º, 45º, 60º, 75º, 90º etc.
(2) Mensuration:
- (a) lengths and areas of plane geometrical figures;
- (b) lengths of arcs and chords of a circle;
- (c) Perimeters and areas of sectors and segments of circles;
- (d) surface areas and volumes of simple solids and composite figures;
- (e) the earth as a sphere: longitudes and latitudes.

Candidates should be able to:

i. calculate the perimeters and areas of triangles, quadrilaterals, circles, and composite figures;
ii. find the length of an arc, a chord, perimeters, and areas of sectors and segments of circles;
iii. calculate total surface areas and volumes of cuboids, cylinders. cones, pyramids, prisms, spheres, and composite figures;
iv. determine the distance between two points on the earth’s surface.
(3) Loci: locus in 2 dimensions based on geometric principles relating to lines and curves.

Candidates should be able to:
identify and interpret loci relating to parallel lines, perpendicular bisectors, angle bisectors, and circles.

(4) Coordinate Geometry:
- (a) midpoint and gradient of a line segment;
- (b) distance between two points;
- (c) parallel and perpendicular lines;
- (d) equations of straight lines.

Candidates should be able to:

i. determine the midpoint and gradient of a line segment;
ii. find the distance between two points;
iii. identify conditions for parallelism and perpendicularity;
iv. find the equation of a line in the two-point form, point-slope form, slope intercept form, and the general form.
(5) Trigonometry:
- (a) trigonometrical ratios of angles;
- (b) angles of elevation and depression;
- (c) bearings;
- (d) areas and solutions of triangle;
- (e) graphs of sine and cosine;
- (f) sine and cosine formulae.

Candidates should be able to:

i. calculate the sine, cosine, and tangent of angles between – 360º ≤ Ɵ ≤ 360º;
ii. apply these special angles, e.g. 30º, 45º, 60º, 75º, 90º, 1050, 135º to solve simple problems in trigonometry;
iii. solve problems involving angles of elevation and depression;
iv. solve problems involving bearings;
v. apply trigonometric formulae to find areas of triangles;
vi. solve problems involving sine and cosine graphs.

SECTION IV: CALCULUS

(1) Differentiation:
- (a) limit of a function
- (b) differentiation of explicit algebraic and simple trigonometrical functions – sine, cosine and tangent.

Candidates should be able to:

i. find the limit of a function
ii. differentiate explicit algebraic and simple trigonometrical functions.
(2) Application of differentiation:
- (a) rate of change;
- (b) maxima and minima.

Candidates should be able to:
solve problems involving applications of rate of change, maxima and minima.

(3) Integration:
- (a) integration of explicit algebraic and simple trigonometrical functions;
- (b) area under the curve.

Candidates should be able to:

i. solve problems of integration involving algebraic and simple trigonometric functions;
ii. calculate area under the curve (simple cases only).

SECTION V: STATISTICS

(1) Representation of data:
- (a) frequency distribution;
- (b) histogram, bar chart, and pie chart.

Candidates should be able to:

i. identify and interpret frequency distribution tables;
ii. interpret information on histogram, bar chat, and pie chart.
(2) Measures of Location:
- (a) mean, mode, and median of ungrouped and grouped data – (simple cases only);
- (b) cumulative frequency.

Candidates should be able to:

i. calculate the mean, mode, and median of ungrouped and grouped data (simple cases only);
ii. use ogive to find the median, quartiles, and percentiles
(3) Measures of Dispersion:
range, mean deviation, variance, and standard deviation.

Candidates should be able to:
calculate the range, mean deviation, variance and standard deviation of ungrouped and grouped data

(4) Permutation and Combination:
- (a) Linear and circular arrangements;
- (b) Arrangements involving repeated objects.

Candidates should be able to:
solve simple problems involving permutation and combination.

(5) Probability:
- (a) experimental probability (tossing of coin, throwing of a dice, etc);
- (b) Addition and multiplication of probabilities (mutual and independent cases).

Candidates should be able to:
solve simple problems in probability (including addition and multiplication).

JAMB 2025 Mathematics Recommended Textbooks

Adelodun A. A. (2000) Distinction in Mathematics: Comprehensive Revision Text, (3rd Edition) Ado –Ekiti: FNPL.
Anyebe, J. A. B. (1998) Basic Mathematics for Senior Secondary Schools and Remedial Students in Higher Institutions, Lagos: Kenny Moore.
Channon, J. B. Smith, A. M. (2001) New General Mathematics for West Africa SSS 1 to 3, Lagos: Longman.
David –Osuagwu, M. et al. (2000) New School Mathematics for Senior Secondary Schools, Onitsha: Africana – FIRST Publishers.
Egbe. E et al (2000) Further Mathematics, Onitsha: Africana – FIRST Publishers
Ibude, S. O. et al.. (2003) Algebra and Calculus for Schools and Colleges: LINCEL Publishers.
Tuttuh – Adegun M. R. et al. (1997) Further Mathematics Project Books 1 to 3, Ibadan: NPS Educational
Wisdomline Pass at Once JAMB.

JAMB 2025 Mathematics Syllabus PDF Download

Click on the download button below to download the JAMB 2025 Mathematics Syllabus as a PDF:

DOWNLOAD PDF

JAMB 2025 Syllabus at Your Fingertips: Find All Subjects Here

Conclusion

The UTME Syllabus is a dynamic document reviewed periodically, with attendant changes to its content and recommended books for the different subjects. In view of this, candidates are to ensure that they are up to date with the syllabus content for each subject in their examination year.

If you have any questions regarding this JAMB Syllabus for Mathematics 2025/2026, don’t hesitate to ask via the comment section.

If you liked this article or have a question, COMMENT BELOW. You can also follow our UPDATES via WhatsApp by clicking this Link.

JAMB Syllabus for Mathematics 2025/2026 PDF Download